Less than 24 hours call to service. Team was prompt and professional! I sincerely appreciate the communication after hours. Nice to know there is a great business handling this type of work when needed.
Dose Pump Replacement
Septic alarm sounding or pump not activating? It could be your dose pump
Signs Your Dose Pump Needs Attention
Septic alarm going off? Pump not turning on? Red light on your control panel?
If your septic system uses a dose pump, problems can escalate quickly when that pump fails. The dose pump is responsible for moving effluent from the pump chamber to your drain field or the next stage of your system. When it stops working properly, wastewater levels rise and alarms activate.
Most customers don’t call asking for “dose pump repair.” They call because something isn’t working.
If your alarm is sounding, reduce water usage immediately and schedule an inspection. Acting quickly can prevent backups and larger system damage.
What Does a Septic Dose Pump Do?
Not all septic systems rely on gravity. If your property has elevation changes or specific soil requirements, your system may use a pump to move wastewater to the drain field in controlled intervals.
The dose pump sits inside a pump chamber (wet well) and pushes effluent through a pressurized line to the next part of the system, which could be the drain field, a holding tank or a lift station. We will tell you exactly which type of control your system has when we inspect it.
- Float controls: the most common setup we see. A float switch turns the pump on when effluent reaches a set level. Most modern systems use two floats, one to turn the pump on and one to turn it off.
- Timer controls: an adjustable timer sets how long the pump runs and how long it rests between doses. Releasing effluent in measured doses spreads it more evenly across the field, which can mean more efficient treatment and a longer field life.
Both systems are designed to protect the drain field and prevent overloading.
Common Dose Pump Problems We Diagnose
We frequently respond to pump-related failures caused by a combination of mechanical wear, electrical issues, and improper maintenance. Because dose pumps operate in a harsh, corrosive environment, even small issues can escalate quickly if left unaddressed.
Common causes include:
- Clogged pump screens from wipes, grease, or debris
- Damaged or obstructed impellers inside the pump housing
- Float switch malfunction preventing proper on/off cycling
- Timer or control panel failure in timed dosing systems
- Electrical supply issues or wiring problems
- Pump motor burnout due to age or excessive strain
- Excess sludge buildup in the chamber restricting intake
- Improperly sized or incorrectly installed pumps
When a pump cannot move wastewater efficiently, water levels rise, alarms activate, and backups can occur. Many pump failures are preventable with regular tank pumping, routine inspection, and addressing warning signs early.
Proper maintenance reduces strain on the pump and extends the life of the entire system.
Dose Pump Repair or Replacement?
Not every dose pump issue requires full replacement. In some cases, a clogged intake, float adjustment, or electrical repair can resolve the problem.
If the pump motor has failed or the unit is improperly sized for the system, replacement may be the more reliable solution. We will inspect the chamber, test the controls, and clearly explain whether repair or replacement is recommended.
Our goal is always to provide a practical, cost-effective solution based on the condition of your system.
Dose pump replacement starts at $1,475.
Everything we do
Our other services
Same crew, same trucks. If you are not sure which of these you need, call and describe what is happening.
-
Septic Tank Pumping and Cleaning
The maintenance that keeps everything else from becoming a repair.
-
Real Estate Septic Inspections
Clear documentation for the buyer, the seller and the agent, on the closing timeline.
-
Septic Tank Filter Inspections
A clogged filter backs up a system that is otherwise fine.
-
Video Inspection and Locating
We find the tank and see inside the lines instead of guessing.
-
Septic System Repair
Backups, odors, wet spots and alarms. We find the cause before we quote the fix.
-
Septic Tank Risers
Skip the digging every time the tank needs service.
-
Grease Trap Pumping
Scheduled and off hour service so the kitchen keeps running.
-
Lift Station Pumping
Routine pumping, float and alarm diagnostics, pump troubleshooting.
-
RV Park Septic Pumping
High volume systems on a seasonal schedule.
-
Commercial Septic Services
Retail, apartments, industrial and anything with a system bigger than a house.
-
Wastewater Treatment Plant Pumping
Plant and digester pumping, sludge hauling and bio-solids for schools, towns and subdivisions.
-
Bypass Pumping
Tanker trucks keep the sewer flowing while a lift station or plant is down.
Where we work
30 miles out from Danville
We cover Hendricks, Morgan and Putnam counties and reach into Boone, Johnson and Marion. Not sure whether you are in range? Call and ask.
Not sure whether you are in range? Call and ask. If we cannot get to you, we will point you to someone who can.
From people down the road
Hundreds of neighbors have already made this call
About half the people who call us found us through Google reviews left by their neighbors. Read a few for yourself before you call.
I never have a never will use a different company. AA Septic is the best.! I walked up to them as they were preparing to serve a homeowner near me, asked if they could work me in when they were finished and they did perfect. I did not have to spend another day at home waiting still only $410 and a free fly water.lol
Great guys to deal with very happy with there service
Very professional men. Felt they did a good job.
Tell us what is going on with your septic
If it cannot wait, call and you will reach someone. If you would rather write it down, send us the details and we will get back to you.
Call us (317) 539-7304